一种航空发动机防冰传感器测温特性试验研究
CSTR:
作者:
作者单位:

中国航发商用航空发动机有限责任公司,上海 200241

通讯作者:

张洁珊,女,工程师,E-mail:zhangjieshan303@qq.com。

中图分类号:

V233.94


Experimental Study on Temperature Characteristic of an Engine Anti-icing Sensor
Author:
Affiliation:

AECC Commercial Aircraft Engine Co.,Ltd, Shanghai 200241, China

  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [19]
  • |
  • 相似文献
  • |
  • 引证文献
  • | |
  • 文章评论
    摘要:

    为了研究热气防冰传感器的测温特性,对一种航空发动机热气防冰传感器开展了冰风洞试验研究,获得了传感器测温特性随来流总温、热气流量、热气温度及水滴参数的变化结果。试验结果表明,热气参数对传感器的测温特性影响较大,随着热气温度和流量的升高,传感器测量偏差度增大;传感器使用环境受航空发动机工作状态的影响,在一定条件内,传感器测量偏差度在合理范围内波动;热气防冰传感器在过冷水滴结冰环境下存在结冰现象,结冰会影响传感器测温腔入口气流,导致传感器测温偏差增大,降低传感器测温性能;当结冰量过多时,传感器失真失效。

    Abstract:

    The test study on temperature characteristic of an engine anti-icing sensor is carried out in the icing wind tunnel. The results of temperature characteristic changing with air total temperature, heat air flow, heat temperature as well as the droplet parameters are obtained. The experimental results show that the heat air parameters have great effect on the temperature characteristic of the sensor, and the average measuring deviation of the sensor increases as the heat air temperature and flow increase. Sensor application scenario is affected by the aircraft engine operation. In certain conditions, the average measurement deviation of the sensor fluctuates in a reasonable range. The ice formed on the sensor will affect the air flow into the sensor temperature cavity, and cause the increase of the sensor temperature deviation. This will finally lead to the decrease of the sensor performance and even failure of the sensor if the ice amount is too much.

    参考文献
    [1] JIN W, TAGHAVI R. A computational study of icing effects on the performance of s-duct inlets: AIAA 2008-4584[R]. USA: AIAA, 2008.
    [2] Lee S, LOTH E. Simulation of icing on a cascade of stator blades: AIAA—2006-0208[R]. USA: AIAA, 2006.
    [3] 易贤, 李维浩, 王应宇, 等. 飞机结冰传感器安装位置确定方法[J]. 实验流体力学, 2018, 32(2): 48-54.
    [4] CAO Y, WU Z, SU Y, et al. Aircraft flight characteristics in icing conditions[J]. Progress in Aerospace Sciences, 2015, 74: 62-80.
    [5] 杨诗雨, 常士楠, 高艳欣, 等. 旋转帽罩电加热防冰瞬态过程研究[J]. 空气动力学学报, 2016, 34(3):289-294.
    [6] 胡娅萍. 航空发动机进口部件结冰的数值模拟研究[D]. 南京: 南京航空航天大学, 2008.
    [7] 屈靖国. 进气道影响下发动机进口段三维结冰的数值模拟研究[D]. 南京: 南京航空航天大学, 2016.
    [8] DONG W,ZHU J J,ZHAO Q Y. Numerical simulation analysis of a guide vane hot air anti-icing system[C]//Proceedings of the 42nd AIAA Thermophysics Conference.[S.l.]: AIAA, 2011.
    [9] DONG W,LEI G,ZHU J,et al. Numerical simulation of hot air anti-icing characteristics of an aero-engine strut[C]//Proceedings of the 53rd AIAA Aerospace Sciences Meeting.[S.l.]: AIAA, 2015.
    [10] 姚华,王国祥. 航空发动机全权限数控系统研究和试飞验证[J]. 航空动力学报, 2004, 19(2): 247-253.
    [11] 张绍基. 航空发动机控制系统的研发与展望[J]. 航空动力学报, 2004, 19(3): 375-382.
    [12] 闫利军,赵亚娟,高志远. 压电加速度传感器在机载测试领域中的安装研究[J]. 电子测量技术, 2014, 37(7): 130-134.
    [13] 董锁利, 丁颖, 张建兰, 等. 机载设备计量性分析与设计讨论[J]. 计测技术, 2011, 31(3): 46-48.
    [14] 白鸽. 航空发动机进气总温传感器测温误差研究[J]. 测控技术, 2020, 39(3): 76-83.
    [15] 张伟昊, 杨伟平, 曹保武, 等. 屏蔽式总温探针流动与换热分析[J]. 航空科学技术, 2018, 29(7): 67-72.
    [16] 李杰, 樊丁, 纪仓囤. 航空发动机温度传感器动态特性改善方法[J]. 航空动力学报, 2012, 27(3): 707-714.
    [17] 熊建军, 倪章松, 李昱, 等. 防冰总压/静压探针结构及控制系统设计与应用[J]. 测控技术, 2019, 38(4):132-137.
    [18] 彭又新, 郑莉, 林贵平. 全静压受感器冰风洞试验技术研究[J]. 中国工程科学, 2019, 11(11): 51-55.
    [19] 张进, 姜志恒, 李瑜. 某型温度传感器防冰结构仿真效果的仿真分析[J]. 传感器与微系统, 2018, 37(10): 54-59.
    相似文献
    引证文献
引用本文

张洁珊,朱剑鋆,闵现花,苏杰.一种航空发动机防冰传感器测温特性试验研究[J].南京航空航天大学学报,2022,54(6):1092-1099

复制
分享
文章指标
  • 点击次数:719
  • 下载次数: 3615
  • HTML阅读次数: 481
  • 引用次数: 0
历史
  • 收稿日期:2022-08-02
  • 最后修改日期:2022-10-09
  • 在线发布日期: 2022-12-05
文章二维码
您是第位访问者
网站版权 © 南京航空航天大学学报
技术支持:北京勤云科技发展有限公司
请使用 Firefox、Chrome、IE10、IE11、360极速模式、搜狗极速模式、QQ极速模式等浏览器,其他浏览器不建议使用!