Honing experiments are carried out for a typical superalloy GH4169 to analyze t he material removal rate against four factors: spindle speed， stroke speed， wedge feed per stroke cycle and grain size. The results show that: the other thr ee factors have a significant influence on material removal rate while the spind le speed affects little， in which grain size and feed per stroke cycle exert the greatest impact on material removal rate. There is a positive correlation betwe en material removal rate and the three caught. And the experience formula is fit wi th multiple linear regression. The study also finds that raise the cross hatch a ngle appropriately can improve material removal rate. Honing process is optimize d for hole with small allowance and a higher roughness request to achieve high er efficiency.