非穿透间隔割缝易碎盖结构设计及分析
作者:
作者单位:

1.南京航空航天大学航空航天结构力学及控制全国重点实验室,南京 210016;2.上海航天设备制造总厂有限公司,上海 200245;3.上海机电工程研究所,上海 201109

作者简介:

通讯作者:

周光明,男,教授,博士生导师,E-mail: zhougm@nuaa.edu.cn。

中图分类号:

TJ768.2;TB332

基金项目:

国家自然科学基金(52005256);江苏省基础研究计划(自然科学基金)(BK20190394);江苏省博士后科研(2020Z437);上海航天科技创新基金(SAST2019-063,SAST2020-001);江苏高校优势学科建设工程(PAPD)。


Structural Design and Analysis of Non-penetrating Interval Cutting Frangible Cover
Author:
Affiliation:

1.State Key Laboratory of Mechanics and Control for Aerospace Structures, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China;2.Shanghai Aerospace Equipments Manufacturer Co., Ltd., Shanghai 200245, China;3.Shanghai Electro-Mechanical Engineering Institute, Shanghai 201109, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    发射箱盖需要满足轻质、结构紧凑等要求。为了满足性能需求,在易碎盖结构方面提出了新的设计方案,即非穿透间隔割缝复合材料易碎盖。针对承压与冲破两种工况展开了试验,分别建立了承压和冲破渐进损伤有限元模型,分析了结构参数对新结构易碎盖力学性能的影响,并探讨易碎盖冲破的损伤失效机理。结果表明,本文建立的有限元模型可有效预测承压工况下盖体的最大变形和冲破工况下盖体的冲破压力;盖体厚度的增大会导致易碎盖承压工况下最大变形减小和冲破工况下冲破压力的增大;而割缝宽度的增大,对承压工况下盖体最大变形的影响较小,但在冲破工况下易碎盖薄弱区会更早进入损伤失效阶段,对其冲破性能产生负面影响。

    Abstract:

    The launch box cover should meet the requirements of light weight and compact structure. In order to meet the performance requirements, a new design scheme named non-penetrating interval slit composite fragile cover is proposed. Finite element models of progressive damage under pressure and break are established, respectively. The influence of structural parameters on mechanical properties of the new structure fragile cap is analyzed, and the damage failure mechanism of fragile cap break is discussed. The results show that the finite element model established in this paper can effectively predict the maximum deformation of the cover under pressure and the bursting pressure of the cover under bursting condition. The increase of the cover thickness will lead to the decrease of the maximum deformation and the increase of the breaking pressure of the frangible cover under the pressure condition. The increase of the slit width has little effect on the maximum deformation of the cover under pressure. However, the weak area of brittle cap will enter the damage failure stage earlier under the condition of breaking, which will have a negative impact on its breaking performance.

    参考文献
    相似文献
    引证文献
引用本文

苑晓旭,南博华,林楠,徐澧明,徐志明,蔡登安,周光明.非穿透间隔割缝易碎盖结构设计及分析[J].南京航空航天大学学报,2023,55(2):311-319

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2021-10-16
  • 最后修改日期:2022-01-05
  • 录用日期:
  • 在线发布日期: 2023-04-28
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司