直升机燃油系统增压转自吸供油动特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Transient Process of Helicopter Fuel System Transferred from Boost Fueling to Self-Suck
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过某型燃油系统增压供油转自吸供油试验,研究了发动机入口处的流量历程。在试验研究和直升机燃油系统增压转自吸供油机理基础上,利用Flowmaster软件建立了某典型直升机燃油系统仿真模型,仿真结果与试验结果吻合较好,验证了模型的正确性。在此基础上,研究了直升机燃油系统增压转自吸供油动特性。结合仿真结果,分析了增压泵出口单向阀的弹簧预紧力、弹簧刚度对发动机入口燃油流量、压力的影响,为燃油系统零部件选型及参数确定提供参考。

    Abstract:

    With the experiment of fuel system undergoing the boost fueling to self-suck, the study on history rate of fuel flow is conducted. Based on the experimental study and the analysis of operational principle of transient process of helicopter fuel system transferred from boost fueling to self-suck, a simulation model of helicopter fuel system is built with commercial code of Flowmaster. The simulation results and the experimental results are in a good agreement, which reveals the validity of numerical model. By combining with simulation results,the impact of check valve spring preload and spring rate on engine inlet pressure and flow rate is analyzed. Consequently, the reference of components of fuel system is provided.

    参考文献
    相似文献
    引证文献
引用本文

杨小龙,罗铁苟,金华,等.直升机燃油系统增压转自吸供油动特性[J].南京航空航天大学学报,2014,46(6):895-900

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2014-12-26
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司