复合材料RTM十字形接头力学性能研究
作者:
作者单位:

1.上海飞机设计研究所,上海 201210;2.南京航空航天大学航空学院,南京 210016

作者简介:

通讯作者:

古兴瑾,男,讲师,硕士生导师,E-mail:guxingjin@nuaa.edu.cn。

中图分类号:

TB33

基金项目:


Mechanical Behavior of RTM Composite Cross Joints
Author:
Affiliation:

1.Shanghai Aircraft Design and Research Institute, Shanghai 201210, China;2.College of Aerospace Engineering, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对某型飞机复合材料扰流板接头,选取典型十字连接区为研究对象,研究4点弯载荷作用下采用树脂传递模塑(Resin transfer moulding, RTM)成型工艺的十字接头典型件的极限承载能力,分析其损伤破坏模式,为复合材料RTM接头的设计强度分析提供参考。论文通过典型细节件4点弯曲试验,测量了其极限承载能力,获得了试件典型破坏模式;同时基于商用ABAQUS有限元软件平台,建立了十字连接区典型细节件有限元模型,数值模拟了其损伤破坏过程。通过比较数值模拟结果和试验结果,验证了数值模拟的可行性。

    Abstract:

    Aiming at the composite spoiler joint of a certain aircraft, the typical cross joint area is selected as the research object to study its ultimate load bearing capacity of the RTM (Resin transfer moulding) formed composite spoiler joint under the four point bending load. Its damage and failure mode is analyzed, and a reference for the design of RTM formed composite joints is provided. A finite element model of the typical detail of the cross connection area is established and its damage process is simulated using the commercial software ABAQUS. The simulated results agree well with the experimental data and thus the feasibility of the numerical simulations is verified.

    参考文献
    相似文献
    引证文献
引用本文

叶聪杰,古兴瑾,袁坚锋,高苏旭.复合材料RTM十字形接头力学性能研究[J].南京航空航天大学学报,2021,53(3):381-387

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2020-09-01
  • 最后修改日期:2021-02-21
  • 录用日期:
  • 在线发布日期: 2023-02-17
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司