星载即插即用协议转换模块的SOC设计与实现
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

V11

基金项目:


Spaceborne Protocol Transition SOC Module of Space Plug-and-Play Architecture
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    微小型卫星即插即用技术的发展取决于不同总线标准接口设备能够快速集成到同一网络中的能力。SpaceWire总线技术是一种星载网络总线标准,已成为网络拓扑结构中的主干网络,而空间即插即用协议(Space plug-and-play architecture,SPA)是美国航空航天学会(American institute of aeronautics and astronautics,AIAA)在SpaceWire标准基础上为了实现快速响应计划而提出的微小型卫星即插即用标准。目前国内正在使用的卫星载荷的通信协议都是非SpaceWire接口的,比如许多小型卫星上的光纤陀螺载荷采用RS442串口通信标准,红外摄像头载荷一般采用1394b标准。本文研究了将1394b接口高速红外摄像头与RS422低速串口光纤陀螺接口集成到SPA网络的协议转换原理和片上处理器(System on chip,SOC)设计,并且在现场可编程门阵列(Field programmable gate array,FPGA)开发板上进行了软硬件验证。

    Abstract:

    The development of micro satellite space plug-and-play architecture technology depends on the ability of these protocols on the bus response in the communication network. SpaceWire is a protocol designed for spaceborne communication network as the main network in topological structure. Space plug-and-play architecture is proposed by AIAA for quick response satellite. However, most of the payload in use are non SpaceWire interface, for instance, 1394b for fiber gyro and RS422 for infrared camera. In this case, this article studied the data transition principle of 1394b and serial port protocol integrate into space plug-and-play architecture by SOC and validated its soft/hardware on FPGA.

    参考文献
    相似文献
    引证文献
引用本文

吴嘉宝, 周大卫.星载即插即用协议转换模块的SOC设计与实现[J].南京航空航天大学学报,2018,50(S1):130-134

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-03-23
  • 最后修改日期:2018-05-30
  • 录用日期:
  • 在线发布日期: 2018-10-18
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司