湿空气透平循环饱和器水温控制建模分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国博士后基金(2016M601593)资助项目。


Modeling and Analysis of Water Temperature Control of Saturator of Humid Air Turbine Cycle
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    湿空气透平(Humid air turbine,HAT)循环是当今最先进的燃气轮机循环之一,饱和器水温控制是HAT循环一种通过改变饱和器给水量维持进口水温的控制逻辑。基于上海交通大学HAT循环实验台建立HAT循环模型,分析饱和器水温控制对HAT循环系统稳态和动态性能的影响。仿真结果表明,饱和器水温控制可以提高系统变工况运行的效率。对于研究对象,系统效率在75%工况条件下提高0.071%。此外饱和器水温控制可以使得饱和器更快达到稳定,但对HAT循环系统功率调节特性的影响较小。

    Abstract:

    Humid air turbine (HAT) cycle is one of the most advanced gas turbine cycles. Saturator water temperature control is a control strategy that adjusts the water flow rate to keep the outlet temperature at the designed value. A HAT cycle model based on the HAT cycle test rig of Shanghai Jiao Tong University is built to analyze the influence of water temperature control on both steady-state and dynamic performance of HAT cycle system. The simulation results show that system efficiency increases by 0.071% for the study object on 75% load. The dynamic response of output power changes little, while the saturator can achieve stable faster.

    参考文献
    相似文献
    引证文献
引用本文

黄地, 韦婷婷, 周登极, 张会生, 苏明.湿空气透平循环饱和器水温控制建模分析[J].南京航空航天大学学报,2018,50(4):477-483

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-11-08
  • 最后修改日期:2017-06-13
  • 录用日期:
  • 在线发布日期: 2018-09-08
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司