用于冲击/发散双层壁冷却数值模拟的源项法模型
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Source Term Model for Impingement/Effusion Double-Wall Cooling Numerical Simulation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了避免冷却孔内的网格划分从而减小计算量,将源项法模型应用到冲击加发散双层壁冷却结构的数值模拟中,并分析了网格设置和负能量源离散方式的影响。结果表明:源项法模型能较准确地预测综合冷效的变化趋势;在本文计算范围内,当发散孔入口/出口处面上平均面网格数超过一定量时,数值模拟结果不再随入口/出口处面上网格密度而变化;发散孔热侧壁面附近第一层网格高度对计算结果影响较大,较合适的高度设置是小于或等于0.05倍发散孔直径;固体内负能量源对应源项应均匀地加载在多个体单元上。

    Abstract:

    In order to avoid the meshing of discrete holes and to reduce computational cost, source term model is used for impingement/effusion double-wall cooling numerical simulation, and the effects of grid setups and heat sink discretization are analyzed. It has been concluded that overall effectiveness results can predict by source term model match the trend of experimental data.When the average number of face mesh on inlet/outlet of effusion hole is larger than a certain value, numerical results do not change with face mesh density on inlet/outlet of effusion hole.The height of first prism layer near the hot side of effusion wall has an important effect on the numerical results, and the proper setupof height is less than or equals to 0.05 hole diameter. Heat sink should be discretized on several volume cells of solid zone.

    参考文献
    相似文献
    引证文献
引用本文

张玉芳 黄望全.用于冲击/发散双层壁冷却数值模拟的源项法模型[J].南京航空航天大学学报,2017,49(S1):24-29

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-09-15
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司