S试件几何形状定义与特性分析
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Geometry Definition and Properties Analysis of S-shape Test Piece
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    S试件是用于综合检测五轴数控铣床动态加工精度的检测试件,目前已申请纳入国际标准ISO 10791-7标准组作为附加测试件。S试件的型面由两个直纹面构成,但S试件草案中并未对S形直纹面的参数化方式进行详细指定,因而导致S试件的几何形状表达方式不唯一,不同的型面几何定义对试件的检测特性有重要影响。针对以上问题,本文给出了Nurbs参数和等弧长两种典型的S试件直纹面定义方法,对比分析了两种直纹面的扭曲角变化及侧铣原理性误差等特性,并根据分析结果选取Nurbs参数作为S试件直纹面定义方式,从原理上完善了S试件的几何定义,有利于S试件标准的推广。

    Abstract:

    As a test piece for detecting the dynamic accuracy of five-axis milling machine tools, S-shape test piece has been applied to ISO 10791-7 groups to be an international standard specimen. The profile of S-shape test piece is constituted by two ruled surfaces. However, the exactly parameterized method of ruled surfaces has not been included in the S-shape piece draft,which may cause the non-unique expression of S-shape test piece. Different definition methods of ruled surfaces may have important effects on the detecting characteristics of S-shape test piece. In order to address the above issue,two typical parametric definition methods of ruled surfaces are provided in this paper, which are iso-parametric method and arc length method. Furthermore,iso-parametric method is chosen as the profile definition method of ruled surface of S-shape test piece according to the analysis of the twist angle and the theoretical machining errors. The research improves the definition theoretically, which may be beneficial to the promotion of S-shape test piece.

    参考文献
    相似文献
    引证文献
引用本文

陈耿祥 李迎光 郝小忠 刘长青. S试件几何形状定义与特性分析[J].南京航空航天大学学报,2017,49(6):793-797

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2018-01-09
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司