三轴充液航天器建模及姿态稳定控制
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Modeling and Attitude Control for Three-Axis Liquid-Filled Spacecraft
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对目前文献中采用的充液航天器模型多为二维平面模型,而实际中充液航天器在轨运行环境为三维环境的情况,对一类贮箱关于航天器中心轴对称的三维面充液航天器进行了动力学建模与姿态控制研究,使其更具有实际意义。首先,根据航天器在轨运行的环境建立了参考坐标系,采用单摆模型等效液体燃料的晃动。在此基础上采用角动量守恒定律建立了充液 航天器各个部分对其质心的惯性力矩,并将其与充液航天器动能方程推导得出的拉格朗日方程相结合,得出完整的动力学方程,完成了建模工作,并分析得出该欠驱动系统零动态不稳定的结论。最后,考虑航天器刚体部分常值转动惯量存在参数不精确,同时三轴力矩发生常值干扰的情况,设计了滑模控制器,保证了充液航天器在轨道坐标系上的姿态稳定。

    Abstract:

    Most of the research is based on the two-dimensional model instead of considering the actual situation of orbiting space vehicle. In this paper, the kinetic equations and the sliding mode control are studied to establish the mathematical model of the three-axis liquid-filled spacecraft in the three-dimensional surface and guarantee the attitude stability, which makes the modeling and the attitude control strategy more practical. First of all, the coordinate systems of actual flight environment are established, and the single pendulum model is equivalent to the sloshing of liquid fuel. Using angular momentum theorem, the inertia moment of spacecraft system with respect to the center of mass can be calculated. Based on the theorem and the Lagrange equations, the whole dynamic equations are derived and the model is established. Thereafter, it is concluded that the under-actuated system has unstable zero dynamics. Finally, considering the parameter errors of rotational inertia and the disturbance moment, a sliding mode attitude control method is designed, which can ensure the on-orbit stability of the three-axis liquid-filled spacecraft.

    参考文献
    相似文献
    引证文献
引用本文

史星宇 齐瑞云.三轴充液航天器建模及姿态稳定控制[J].南京航空航天大学学报,2017,49(1):132-139

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-03-02
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司