电控旋翼传感器系统余度设计及表决算法研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Research on Sensor System Redundancy Design and Voting Algorithm of Electrically Controlled Rotor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    控旋翼通过电作动器驱动伺服襟翼偏 转,通过气弹作用带动桨叶变距,从而实现旋翼操纵。 为提高电控旋翼传感器系统的可靠性,文中以模型电控旋翼系统为对象,提出了一套非相似 三余度传感器系统方案;进一步提出了一种改进的表决算法,该算法通过将基于LMS算法的 预测值引入表决中,使三余度传感器系统在出现两路随机故障时仍能够有效判别正常信号, 从而提高了系统的可靠性;通过仿真验证了该改进表决算法的可行性;最后通过对襟翼传感 器的试验研究,证明了所提出的余度设计方案及表决算法的有效性。 

    Abstract:

    Electrically controlled rotor changes blade pitch through trailing flap deflection, so as to realize the primary control of the rotor. The reliability of the electricity system is lower than the traditional mechanical systems. Thus , in order to improve the reliability of the sensor system of electrically contr olled rotor, a set of nonsimilar triplex redundant sensor system program is br o ught forward based on model electrically controlled rotor. Then an improved voti ng algorithm is performed,which can improve the fault tolerance of the sensor s ystem. Simulation results show the validity of the improved algorithm. Finally, experiments are conducted based on flap sensors, and the results show that the d es igned scheme and the improved voting algorithm can effectively improve the relia bili ty of the sensor system.

    参考文献
    相似文献
    引证文献
引用本文

王恒国 陆洋.电控旋翼传感器系统余度设计及表决算法研究[J].南京航空航天大学学报,2015,47(2):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-04-29
  • 出版日期:
您是第位访问者
南京航空航天大学学报 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司